{{:projets:turntable:btn-rec-scratch.jpg|}}

====== Turntable ======

  * Porteur du projet : resonance
  * Date : 12/02/2019
  * Licence : libre !
  * Fichiers Scratch : {{ :projets:turntable:scratch.zip |scratch.zip}}
  * Fichiers Synth-rockband : {{ :projets:turntable:synth-rockstar6.zip |synth-rockstar6.zip}}
  * 


===== Test =====

| {{youtube>yCrV8tEK90g?medium}} | Utilisation d'un [[https://www.dfrobot.com/wiki/index.php/Incremental_Photoelectric_Rotary_Encoder_-_400P/R_SKU:_SEN0230#Specification|encoder photo-electrique]] de (400 pas/tour) pour se balader dans une table audio d'un patch puredata.|
=== code arduino ===
++++ audio-scratchBtn2.ino |
<code cpp>
/***************************************************
  Two phase quadrature encoder(Incremental)
* ****************************************************
   To determine motor with encode （CW OR CCW）

  @author Dong
  @version  V1.0
  @date  2016-5-26
  All above must be included in any redistribution
* ****************************************************/
#define  A_PHASE 2 // modified 
#define  B_PHASE 3
double flag_A = 0;  //Assign a value to the token bit
double flag_B = 0;  //Assign a value to the token bit
double pos = 0;
double newpos = 0;

/** *  */

// set pin numbers:
const int buttonPin = 8;     // the number of the pushbutton pin
const int ledPin =  13;      // the number of the LED pin
// variables will change:
int buttonState = 0;         // variable for reading the pushbutton status
int previousButtonState = 0;


void setup() {
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT);      
  // initialize the pushbutton pin as an input:
  pinMode(buttonPin, INPUT_PULLUP); 
  //
  pinMode(A_PHASE, INPUT);
  pinMode(B_PHASE, INPUT);
  Serial.begin(9600);   //Serial Port Baudrate: 9600
  //Interrupt trigger mode: RISING
  attachInterrupt(digitalPinToInterrupt( A_PHASE), interrupt, RISING); 
  previousButtonState = digitalRead(buttonPin);
}
void loop() {

  if (pos != newpos){
  Serial.print("enc ");
  Serial.println(pos);
  delay(10);// Direction judgement
  newpos = pos;
  }

  //
  // read the state of the pushbutton value:
  buttonState = digitalRead(buttonPin);

  // check if the pushbutton is pressed.
  // if it is, the buttonState is HIGH:
  if (buttonState == HIGH && previousButtonState == LOW) {     
    // turn LED on:    
    digitalWrite(ledPin, HIGH);  
    Serial.println("btn 1");
    delay(20);
  } 
  if (buttonState == LOW && previousButtonState == HIGH) {     
    // turn LED off:    
    digitalWrite(ledPin, LOW);  
    Serial.println("btn 0");
    delay(20);
  } 
  previousButtonState = buttonState;

}
void interrupt()// Interrupt function
{ char i;
  i = digitalRead( B_PHASE);
  if (i == 1)
  {
    flag_A += 1;
  }
  else
  {
    flag_B += 1;
  }
  pos = flag_A - flag_B;
}
</code>
++++